Example: Operating the Tuner
Operation
This section describes how to operate the tuner. For details on tuner operation, please refer to the operating instructions provided with the receiver/ amplifier.
1Touch FUNCTION.
The FUNCTION screen appears.
2Touch 
.
The receiver/amplifier’s function switches to TUNER and the tuner screen appears. However, preset station, station name, band, and frequency do not appear in the display of the amplifier.
Preset station | Station name |
To operate other functions
Touch SUB or use the JOG DIAL to scroll to display the icons used for memorizing broadcast stations and station names.
•To receive manually, touch DIRECT and input the frequency.
•When memorizing a received broadcast station, memorize after touching MEMORY.
Viewing the LIST
Touch LIST to view the names of the broadcast stations downloaded from the receiver/amplifier (see page 25 for details).
The LIST screen can only be displayed when the FUNCTION is set to TUNER.
Band | Frequency |
•Touch FM/AM to change the band.
•Touch FM MODE to switch the FM reception mode to AUTO or MONO. If the FM stereo reception is poor, select MONO. You will not be able to enjoy the stereo sound effect, but the sound will be less distorted.
•Touch PRESET + or – to search for preset stations.
•Touch TUNING + or – to search for stations that can be received.
•Touch SHIFT to switch memory pages (A, B, C).
•Touch TUNING MODE to switch the tuning mode to AUTO or MANUAL.
•During display of any of the screens, touching FUNCTION returns to the FUNCTION screen.
zWhen broadcast stations or frequencies are not displayed properly
Point the commander at the receiver/amplifier and touch
RELOAD.