Preparing the Commander

Please be sure to carry out the procedures described in “Setting up the commander” on page 6 after inserting the batteries.

Inserting batteries into the commander

Insert the four size-AA (LR6) alkaline batteries (for commander operation) and the lithium battery (for preservation of the commander’s internal memory).

1Remove the battery compartment cover.

Push in direction of arrow

2Insert the alkaline batteries.

Size-AA alkaline batteries

 

]

 

 

}

}

]

 

] }

 

 

}

 

 

 

]

Always insert the negative (–) pole side of batteries first.

3Insert the lithium battery.

After wiping the lithium battery thoroughly with a dry cloth, insert it into the compartment with the positive (+) pole side facing up.

Coin shaped lithium battery CR2032

Positive (+) pole side up

4 Close the battery compartment cover.

Preparations

After inserting the batteries, touching the touch panel turns on the light and displays the touch panel (LCD) adjustment screen. Follow the procedure on the next page for touch panel adjustment and initial communication.

Notes

•The LCD lights up when touched.

•VOL +/–, MUTING and SLEEP can be used even when the LCD is not lit.

•Pressing BACK LIGHT/COMMANDER OFF turns the backlight on or off. Holding it down for about 2 seconds turns the LCD off.

•If the commander is not used for 10 seconds, the LCD turns off automatically (Auto Off function).

5GB