Adjusting the Commander’s Operating Environment
Operation
Setting the function name
1Touch SETUP.
The SETUP screen appears.
2Touch FUNC NAME.
The FUNCTION NAME EDIT screen appears.
If FUNC NAME does not appear in the display, use the JOG DIAL to scroll the screen until FUNC NAME appears.
4Touch NAME EDIT.
The NAME EDIT screen appears.
Current name display
Name input displayTouch to upload the name to the receiver/ amplifier.
Touch to set the name to the commander
Name input buttons
5Enter the name.
After the name has been entered, touch SET. The new function name is set in the commander.
After the name has been entered, point the commander toward the receiver/amplifier and touch UPLOAD. The new function name is set in the receiver/amplifier.
Touching 4 moves list up
Touching $ moves list down
3Touch the function that you want to edit.