Example: Recording from CD to MD
This section describes how to record audio from a CD to | 4 Touch to select the recorder component (MD/DAT |
an MD as an example of recording audio/video. | in this example). |
| When MD/DAT is touched, the REC EDIT operation |
Other operations | screen appears. |
Recording from a DVD to a video deck is basically the same procedure. For details on the buttons used in recording, refer to the operating instructions supplied with the receiver/amplifier and other components.
1Touch FUNCTION.
The FUNCTION screen appears.
2Touch 
.
The REC EDIT screen appears.
5 Touch rin RECORDER: MD/DAT, then touch (in
PLAYER: CD.
Starts playback from the CD player
3Touch to select the player component (CD in this example).
Because CD is not displayed, Use the JOG DIAL or touch $to scroll downward through the list. If you scroll to far, touch 4to scroll back up.
Operation
PLAYER
Touching 4 moves list up
Touching $ moves list down
When PLAYER is selected, the receiver/amplifier’s function automatically switches to the PLAYER component.
Starts recording on the MD deck.
Recording starts.
The FUNCTION screen returns once the recording finishes.
To stop recording at any time
Although recording stops automatically in the above example, recording can also be stopped at any time by touching pin RECORDER.
To stop the recording procedure at any time
Touch FUNCTION to display the FUNCTION screen. During steps 2 to 3, touching EXIT will also stop the recording procedure.