Using a command that has been learned
By using the Learning function, it is possible for this commander to perform learned operations. For details on how to learn the operation codes of other components using the Learning function, see page 29.
1Touch FUNCTION.
The FUNCTION screen appears.
2Touch 
.
When 
does not appear in the screen, use the JOG DIAL to scroll the screen until it is displayed, and then
touch it.
3Touch the appropriate area from A to J corresponding to the learned command.
4Touch the box containing the code you want to send.
A mark (■) appears in the box when it has already learned a command.
Selecting a source to listen to using SUB ROOM
Select a source that you would like to enjoy listening to in another room. You can switch the audio output to the 2nd AUDIO OUT on the receiver/amplifier. For details, please refer to the operating instructions supplied with your receiver/amplifier.
1Touch FUNCTION.
The FUNCTION screen appears.
Operation
2 Touch 
.
When 
does not appear on the screen, use the JOG DIAL to scroll the screen until it is displayed, and then touch it.
3Touch the source that you want to listen to in another room.
The audio output on the receiver/amplifier changes.