Performing Several Commands in Sequence Automatically (Macro Play)
Operation
The Macro Play function lets you link several IR codes in sequential order as a single command. The remote provides 3 macro lists (MACRO 1, 2 and 3). You can specify up to 10 IR commands for each macro list.
1Touch FUNCTION.
The FUNCTION screen appears.
2Touch 
.
The MACRO screen appears.
When 
does not appear in the FUNCTION screen, use the JOG DIAL to scroll through the list until it is
displayed, and then touch it.
BOX Number
Send key
Notes
•For some models, the receiver/amplifier cannot operate the Macro Play commands as the time between each command is too short. In this case, set “WAIT TIME” between each command. To set “WAIT TIME”, refer to “Macro Play setting” on page 26 and 27.
•For some makers other than Sony, there are some commands that cannot be used in Macro Play.
Command
Condition
Category SENDING: Outputting the
command
Done!: Outputting is
finished
•Touch SEND to operate Macro Play. The current command is displayed in black. The finished commands are grayed out.
•To cancel Macro Play, touch CANCEL. When Macro Play is not operating, touching CANCEL returns to the FUNCTION screen.