4Select the type of component connected (Ex: VCR).
To display other items, use the JOG DIAL or touch 4 or $to scroll through the list.
The FUNCTION&USER IR:MAKER CODE screen appears.
5Touch the remote controller mode of the connected component (Ex: Sony VTR1).
The component selected in steps 4 to 5 will be registered at the function selected in step 3, and the SETUP screen reappears. A long beep sound is emitted to indicate that registration was successful. Operation is now possible from the FUNCTION screen.
If a series of short beeps is emitted, redo the registration procedure. If this occurs, make sure the receiver/amplifier is turned on and that the commander is pointing toward the receiver/amplifier during operation.
To stop registration at any time
Touch EXIT during step 2 or touch CANCEL during steps 3 to 5.
Notes
•All icons may not be displayed when registering components made by certain manufacturers.
•Some commands may not function even though they are displayed when registering components made by certain manufacturers.
FUNCTION screen setup
You can set the FUNCTION screen not to display components you do not use.
1Touch SETUP.
The SETUP screen appears.
2Touch FUNCTION HOOK UP.
The FUNCTION HOOK UP screen appears.
Operation
3Select the function not to be displayed and touch NO.
To display other items, use the JOG DIAL or touch 4 or $to scroll through the list.
The selected component is set not to appear and the SETUP screen reappears.
To display the components set not to be displayed
Touch YES instead of NO in step 3.
zComponents that have been registered (see page 24) are set to “YES” automatically.
Note
When a function does not appear in the display even though FUNCTION HOOK UP is set to YES, turn the JOG DIAL to display the function.
Downloading receiver/amplifier data
Various types of data can be downloaded from the receiver/amplifier.
When carrying out this operation, make sure that the receiver/ amplifier’s power is on, and be sure to point the commander’s transmitter/receiver section toward the display on the receiver/ amplifier. Also, operate the commander at a distance of about 1~2 meters from the receiver/amplifier.
1Touch SETUP.
The SETUP screen appears.