4
5
Select the BOX Number.
Select the BOX Number you want to register the command. You can program up to 10 commands in one area.
The CATEGORY list appears.
Select the CATEGORY.
Select the component category for the BOX Number you selected in step 4.
The MAKER list appears according to the category you selected.
When the maker is Sony only, go to step 7. You can select “WAIT TIME”other than audio components as the CATEGORY.
6Select the MAKER.
Select the maker from the maker list.
The COMMAND list appears according to the maker you selected.
Operation
7Select the COMMAND.
Select the command you want to register.
The items selected in step 5 to 7 are registered in the box selected in step 4.
The BOX Number list reappears.
zTo clear the programmed MACRO
Select the BOX Number of the MACRO you want to clear in step
4.Select “MACRO CLEAR” in the CATEGORY in step 5. The items of the BOX are cleared.
zTo set “WAIT TIME”
Select the BOX Number of the MACRO you want to set the wait time for in step 4. Select “WAIT TIME” in the CATEGORY in step 5.
The wait time list (1 to 10 second in 1 second increments) appears. Select the time you want to delay. After you selected, the BOX Number list reappears.
If you press ALL CLEAR on the receiver/amplifier, all the registered MACRO programs are cleared.