Adjusting the Commander’s Operating Environment
2Touch DOWNLOAD.
The DOWNLOAD screen appears.
Macro Play setting
The following is an example of how to set the command “POWER” for SONY VTR 1 in BOX 2 of MACRO 1. Set other commands in a similar manner.
1Touch SETUP.
The SETUP screen appears.
Operation
“TUNER PRESET NAME“ does not appear in the case of an amplifier.
3Touch to select the data you wish to download and press:
FUNCTION NAME: Names of connected components.
TUNER PRESET NAME: Broadcast station names etc., memorized in receiver. This is not displayed in case of amplifier.
CD MEMO: CD song titles or disc titles etc., from a Sony CD changer (5/50/200/300 CD) connected to the receiver/amplifier with CONTROL A1 cord.
Downloading starts, and the progress is displayed. During this time, please leave the commander’s transmitter/receiver section pointed toward the display on the receiver/amplifier.
When you touch CANCEL, the data downloaded before you touched CANCEL will be saved.
When downloading has finished, the DOWNLOAD screen reappears. A long beep sound is emitted to indicate that the downloading was successful.
If a series of short beeps is emitted, redo the downloading procedure. If this occurs, make sure the receiver/amplifier is turned on and that the commander is pointing toward the receiver/amplifier during operation.
4Repeat step 3 to download other data.
5Touch EXIT.
Downloading finishes and the SETUP screen reappears.
2
3
Touch MACRO.
The setting screen for Macro Play appears.
Select the MACRO Number.
Select MACRO 1, MACRO 2 or MACRO 3 in which you want to register the macro program. For example, select MACRO 1.
The BOX Number list appears.