Owner’s Record

The model and serial numbers are located on the bottom. Record these numbers in the spaces provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No.

 

Serial No.

WARNING

To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

WARNING

This installation should be made by a qualified service person and should conform to all local codes.

WARNING

A readily accessible disconnect device shall be incorporated in the building installtion wiring.

WARNING (for Installers only)

Instructions for installing the equipment on the ceiling:

After the installtion, ensure the connection is capable of supporting four times the weight of the equipment downwards.

CAUTION

The rating label is located on the bottom.

CAUTION for LAN port

For safety reason, do not connect the LAN port to any network devices that might have excessive voltage.

Power SupplyCaution for U.S.A. and Canada

The SNC-RZ25N operates on 24V AC or 12V DC.

The SNC-RZ25N automatically detects the power.

Use a Class 2 power supply which is UL

 

Listed (in the U.S.A) or CSA-certified (in

 

Canada)

 

Caution for other countries

 

The SNC-RZ25P operates on 24V AC or

 

12V DC.

 

The SNC-RZ25P automatically detects the

 

power.

 

Use a power supply rated 24 V AC or 12 V

 

DC which meets the requirements for SELV

 

(Safety Extra Low Voltage) and complies

 

with Limited Power Source according to

 

IEC 60950.

 

For customers in the U.S.A. (SNC-

 

RZ25N only)

 

 

 

 

This device complies with Part 15 of the

 

 

FCC Rules. Operation is subject to the

 

 

following two conditions: (1) This device

 

 

may not cause harmful interference, and (2)

 

 

this device must accept any interference

 

 

received, including interference that may

 

 

GB

cause undesired operation.

 

 

 

 

NOTE: This equipment has been tested and

 

found to comply with the limits for a Class A

 

digital device, pursuant to part 15 of the FCC

 

Rules. These limits are designed to provide

 

reasonable protection against harmful

 

interference when the equipment is operated

 

in a commercial environment. This

 

equipment generates, uses, and can radiate

 

radio frequency energy and, if not installed

 

and used in accordance with the instruction

 

manual, may cause harmful interference to

 

radio communications. Operation of this

 

equipment in a residential area is likely to

 

cause harmful interference in which case the

 

user will be required to correct the

 

interference at his own expense.

 

You are cautioned that any changes or

 

modifications not expressly approved in this

 

manual could void your authority to operate

 

this equipment.

 

All interface cables used to connect

 

peripherals must be shielded in order to

 

comply with the limits for a digital device

 

pursuant to Subpart B of Part 15 of FCC

 

Rules.

 

1GB