Assigning the IP Address to the Camera

To connect the camera to a network, you need to assign a new IP address to the camera.

Before assigning the IP address, connect the camera to a computer or a network.

For details, see “Connecting to a Computer or a Network” (page 17).

You can assign the IP address in two ways:

•Using the setup program stored in the supplied CD-ROM

For details on the operations, see “Assigning the IP Address Using the Setup Program” on page 20.

•Using the ARP (Address Resolution Protocol) commands

Open the DOS window on the computer and enter the specified ARP commands.

For details on the operations, see “Assigning the IP Address to the Camera Using ARP Commands” in the User’s Guide stored in the supplied CD-ROM.

Note

For determining the IP address to be assigned to the camera, consult your system administrator.

Assigning the IP Address Using the Setup Program1 Insert the supplied CD-ROM disc into your CD-ROM drive.

After s short time a window will open displaying the files on the CD-ROM.

2 Click the Setup icon of IP Setup Program.

The File Download dialog opens.

3 Click Open.

Note

You cannot install the IP Setup Program properly if you click Save in the File Download dialog.

4 Install the IP Setup Program to your computer following the wizard displayed.

If “Software License Agreement” is displayed, read it carefully and accept the agreement to continue the installation.

5 Start the IP Setup Program.

The program detects the SNC-RZ25N or SNC-RZ25P connected on the local

GB 20 Assigning the IP Address to the Camera