the screws are temporarily tightened properly, securely tighten each one in turn.
Note
For assembly, use only the screws supplied with the camera. Using other screws may damage the camera.
4 Insert the protrusions raised on the ceiling bracket (A) into the spaces prepared in the ceiling bracket (B), and temporarily attach them by pushing the ceiling bracket (A) to the rear.
Ceiling
bracketCeiling
(B)
Ceiling bracket (A)
5 While pushing up on the front part of the camera, attach it using the supplied three screws (3M 3 ⋅ 6), starting with the screw at position 1.
Ceiling
1 | 2 3 4 |
|
|
| 5 6 7 |
| |
|
|
| 8 9 10 |
1
3M 3 ⋅ 6 (supplied)
6 Connect the cables to the connectors on the rear of the camera.
Ceiling
1 | 2 3 4 |
|
|
|
| 5 6 7 | 8 9 10 |
|
|
|
Note
Take the proper steps to ensure that the load of the cables connected does not cause problems.
GB 14 Installing the Camera