3CF card lever

Press the lever to remove the CF card from the CF card slot.

4POWER indicator (green)

When the power is supplied to the camera, the camera starts checking the system.

If the system is normal, this indicator lights up.

If a system error occurs, this indicator flashes every second. In this case, consult your authorized Sony dealer.

5Lens

A × 18 optical zoom, auto-focus lens is mounted as standard equipment.

Rear

67 8

DC 12V + 1 AC 24V 2

m

5

121110 9

8

7

6

5

4

3 2

1

IMAGE FLIP

9 0 qa qs

6 (network) port (RJ45)

Connect to the 10BASE-T or 100BASE- TX network using a network cable (UTP, category 5).

7DC 12 V/AC 24 V (power input) terminal

Connect to a 12V DC or 24V AC power supply system.

8T(video output) connector (BNC type)

Outputs a composite video signal. Connect to a composite video input connector of a video monitor, VCR, etc.

9Reset switch

To reset the camera to the factory default settings, supply the power to the camera, while holding down this switch with a pointed object.

q; m (microphone input) jack (minijack, monaural)

Connect a commercially available microphone. This jack supports plug-in- power microphones (rated voltage: 2.4 V DC).

You can connect the microphones of the following specifications to this camera. Type: Electric condenser microphone

Plug-in power system Directivity: Nondirectional Sensitivity: – 40 ± 3.5 dB Frequency range: 50 – 15,000 Hz

qa 5 (line output) jack (minijack, monaural)

Connect a commercially available speaker system with the built-in amplifier.

You can connect the speakers of the following specifications to this camera. Type: Active speaker

Impedance: Input impedance 4.7 kohms or more

Plug: ø3.5 Mini-plug

qs I/O (Input/Output) port

This port is provided with an RS-232C port, two sensor inputs and two alarm outputs.

The RS-232C port is used when you connect peripheral devices to the camera using the RS-232C interface, and control the devices from the computer or transmit/receive data from the devices via the network.

The sensor input is used as the alarm input. The camera operation can be synchronized with E-mail or other applications.

GB 10 Location and Functions of Parts and Controls