BBasic Installation and Connections
Installing the
Camera
Installing the Camera on the Ceiling
Using the supplied ceiling brackets, wire rope and screws, you can utilize existing junction boxes, etc., to attach the camera to the ceiling.
When you install the camera, always install it on a level ceiling. If you have to install it on a sloping or uneven ceiling, make sure that the place where you install it is within ±15 degrees of the horizontal in order to ensure the pan/tilt mechanism functions properly.
Notes
•If you attach the camera to the ceiling, entrust the installation to an experienced contractor or installer.
•If you install the camera on the ceiling, ensure that the ceiling is strong enough to withstand the weight of the camera plus the ceiling brackets and then install the camera securely. If the ceiling is not strong enough, the camera may fall and cause serious injury.
•To prevent the camera from falling, make sure to attach the supplied wire rope.
•If you attach the camera to the ceiling, check periodically, at least once a year, to ensure that the connection has not loosened. If conditions warrant, make this periodic check more frequently.
Before installation
After deciding the direction in which the camera will shoot, make the required holes for the junction box, and connecting cables.
Installation
1 Attach the wire rope to the junction box in the ceiling.
Use a screw hole and a screw (not supplied) in the junction box to attach the wirerope.
Ceiling
Hole for connecting cable
Note
The connecting cables cannot be passed through the ceiling bracket (A). A hole for the wiring is required in the ceiling at the back of the camera where it is attached to the ceiling.
GB 12 Installing the Camera