The alarm output is used to control connected peripheral devices by synchronizing with an external sensor input, the built-in activity detection function, a manual trigger button, Day/ Night function or the timer function.

For details on each function and required settings, see the User’s Guide stored in the supplied CD-ROM.

For pin assignment and wiring, see “Pin Assignment and Use of I/O Port” on page 28.

The I/O Port of this unit corresponds to the VISCA command. However, there are some commands which are not supported.

Bottom

qd

qf

qd Tripod mounting hole

Use this hole to attach a commercially available tripod when attaching the camera to the tripod.

qf Ceiling bracket mounting screw holes

When installing the camera to the ceiling, secure the supplied ceiling brackets to these holes using the supplied screws.

Overview

Location and Functions of Parts and Controls 11 GB