16. Search

16-1. ID/INDEX Number Search

This sets the target ID/INDEX number and searches the start.

The search stops after the target point is found.

16-1-1. Searching with the SEARCH key

1 Press the SEARCH key in STOP mode, and then press the INDEX/ID key. ID/INDEX number search mode is started.

2 Use the g / G / f / F keys to set the target ID/INDEX number.

3 Press the INDEX/ID key.

This searches for the start point of the target ID/INDEX and then stops.

3

2

1

16-1-2. Searching with the TOC Viewer (see 14-8)

1 Use the TOC Viewer to select the target ID/INDEX number.

2 Press the SEARCH key.

This searches for the start point of the target ID/INDEX and then stops.

16-2. Start ID Search

This searches the ID at the start position for each recording.

The search stops after the target point is found.

16-2-1. Searching at the Next Recording Start Position

Press the SEARCH key in STOP mode, and then press the FF key.

This skips to and stops at the start point of the next recording from the current position.

16-2 (E)

SIR-3400H / SIR-3032i / SIR-3032W