17. Control by Telnet
Command | Contents |
|
|
TSG : | Test signal selection |
Command format | TSG : <1>/[ ] |
| <1> : Test signal selection |
| Analog channel |
| 0= OFF |
| 1= AC |
| 2= +DC |
| 3= _DC |
| 4= GND |
| 5=RSV |
| Related command : TSG? |
|
|
UTL: | Utility mode setting |
Command format | UTL : <1><2><3><4><5><6><7> |
| <1> : 0=None |
| 1=Rebuild |
| <2> : 0=Contents in the drive 1 is reflected on the drive 2. |
| 1=Contents in the drive 2 is reflected on the drive 1. |
| <3> : 0=None |
| 1=The specified ID is deleted. |
| <4> : 100 digits ID |
| <5> : 10 digits ID |
| <6> : 1 digit ID |
| <7> : RSV |
| c |
| In case of <1> and <3>, when one is set to “1”, be sue to set the other to “0”. |
| Ex.) OK <1> : 1, <3> : 0 |
| NG <1> : 1, <3> : 1 |
| Related command : UTL? |
| c |
| When not selecting the mode, it all sets to ZERO. |
|
|