1. Overview
Recording/Playback
By adopting the 16 bit linear quantization, the dynamic range of 90 dB Typ is achieved. Further more the phase difference between channels is suppressed to less than 1 degree. And the analog input level is allowed to ± 133 % of the input range value, and the input DC offset of each channel can be automatically or manually adjusted within ± 100 %.
Time Axis Conversion
Data speeds for recording and playback can be selected from the 7 levels of 4, 2, 1 (normal speed), 1/2, 1/4, 1/8 and 1/16. Data can be recorded for a maximum of 256 hours at 1/16 speed when using a 200 GB HDD. By playing back at low speed the data recorded at high speed, data can be converted to the playback frequency to meet the process speed of the external analyzing equipment.
Synchronized Operation
By connecting two recording units with the synchronizing cable (option), the synchronized recording/playback can be performed with accuracy of a quartz level.
This enables doubling of the number of channels without reducing the frequency bandwidth or data transfer rate.
Trigger Recording
Recording can be started by receiving the trigger signal from the external source.
Once the
Compatibility with Computers
Data recorded in HDDs by the
Therefore, even if the recording unit is not available, data can be directly analyzed.
By employing the
Control Functions
The unit can be controlled from the local (front panel) or from the host computer via Ethernet.