4. Preparations

4-7. Source and Record

If the media position information or amplifier setting information is altered in the STOP mode, the mode automatically changes to the source mode.

4-7-1. Source

When the unit is in the E-E, REC-PAUSE, or REC mode, or is stopped from one of these modes, it automatically switches to the source mode. In this mode, source data (values set in the recording unit) is displayed for the media position information (address, and real-time clock) and the amplifier setting information (input range value, input DC offset value, and output level value).

In the source mode, press the F3 key to sequentially change the contents displayed as follows.

F3

Amount of recording

Address

media remaining

 

Source time

 

Source time

(±h/m/s)

(h/m)

 

(y/m/d)

 

(h/m/s)

 

 

 

 

 

 

 

 

F3

 

F3

 

F3

 

4-7-2. Record

When the unit is in the FWD mode, or is stopped from FWD mode, it automatically switches to the record mode. In this mode, record information on the media (values recorded) is displayed for the media position information (ID number, address, and real-time clock) and the amplifier setting information (input range value, input DC offset value, and output level value).

In the record mode, press the F3 key to sequentially change the contents displayed as follows.

 

 

 

 

 

 

 

 

 

 

F3

 

F3

 

F3

 

 

 

Address

Amount of recording

 

Record time

 

Record time

(±h/m/s)

media remaining

 

(y/m/d)

 

(h/m/s)

 

 

(h/m)

 

 

 

 

 

 

 

 

 

 

 

 

 

F3

 

 

 

 

 

 

 

 

 

 

4-8 (E)

SIR-3400H / SIR-3032i / SIR-3032W