15. Data Recording/Playback
1 When the switch on the left side of the microphone is pressed, this function is ON, and when released it goes OFF. This makes it possible to record only the necessary sounds.
2 The brightness of the MIC lamp (lamp at the bottom right of the MIC jack) changes based on the microphone input level.
n
.The recording level can be adjusted automatically with the recording unit’s AGC function.
.Sound cannot be output from the speaker in the REC mode or while the earphone is being used.
When 
(voice annotation) is selected with the SPEAKER key, voice annotations recorded to the recording media are played back from the speaker (or earphone when using the PHONE jack). Adjust the volume with the VOL knob.
Be careful that you do not listen to earphone (sold separately) at a high volume for extended periods of time.
n
.When 
(voice annotation) is selected with the SPEAKER key, the data signal of the monitor channel is
played back from the speaker or earphone.
.When the speed during recording and playback differ, the pitch (signal frequency) of voice annotations
differs from the pitch at recording.
.The existence of voice annotations can be checked by the light of MIC lamp while the VOL knob is in the minimum position.
(E) |