13. Other Settings

13-5. Changing the AC Voltage

Be careful to use the correct voltage since usage of an incorrect voltage can lead to a fire or failure of the unit.

At shipping, the AC voltage is set to either 100/120 V or 220/240 V. The setting is displayed on the sticker on the AC voltage selector switch. If you peel off the sticker and change the voltage, be sure to always re-check the usage voltage before using.

c

.When the AC voltage selector switch is set to AC 100/120 V, supplying AC 198 to 250 V may damage the

recording unit's internal circuitry.

.When the AC voltage selector switch is set to AC 220/240 V, the recording unit will not operate when supplied with AC 90 to 132 V.

1 Use the AC voltage selector switch on the rear panel of the respective unit to change the voltage. Move the switch to the selected voltage side.

Left side

: 100/120 V (allowable 90 to 132 V)

Right side

: 220/240 V (allowable 198 to 250 V)

13-2 (E)

SIR-3400H / SIR-3032i / SIR-3032W