Sony SIR-3400H manual 56

6. Setting and Check Items

Execution items

Setting	Default setting	Operation				Remarks	Reference
		LCD screen	Key	Telnet	Panel
Panel lock	—		O	O		If necessary due to the operating	12-13
						environment or other conditions
Copying Mark1/Mark2	—	O		O		For editing data after recording	14-2
Formatting the hard disk drive	—	O		O		For using new media before recording	14-3
Repairing recording media	—	O		O		When the media is corrupted, or a	14-4
discrepancies						different media is inserted at one side
Calibration	—	O		O		If needed before recording	14-5
Bar meter auto adjustment	—	O					14-6
Diagnostics	—	O		O		If necessary after error display	14-7

Check items

Setting	Default setting	Operation				Remarks	Reference
		LCD screen	Key	Telnet	Panel
Volume	—				O (Front)		13-4
Recording media contents	—	O		O		After recording	14-8
Alarm status	—	O		O			17-2
Front panel status	—	O		O			17-2
Unit configration	—	O		O			17-2
Command	—			O			17-2
Error	—	O		O			17-2
Signal level	—	O		O			17-2
Calibration	—	O		O			17-2

6-1-2. Measuring Unit Setting/Checking (Including Input/Output Settings)

These are the setting items for input and output. These items are set at the recording unit.

O: Setting enabled

Setting	Default setting	Operation				Remarks	Reference
		LCD screen	Key	Telnet	Panel
Input range	± 1 Vpk		O	O			12-5
Input DC offset	0 %		O	O			12-6
Input format	Direct DC		O				12-7
Output level	± 1 Vpk		O	O			12-10
Measuring unit	—			O	O (Front)		17-2
Monitor channel

6-2 (E) SIR-3400H / SIR-3032i / SIR-3032W