3 Attaching the DomeCasing

1

2

1 Aligning the two screw holes on the

slit cover with the two slit cover screws on the angle adjuster bracket, put the slit cover back on. Turn the slit cover to set it in place, and tighten the slit cover screws.

2 Align the three screw holes on the dome casing with those on the unit casing.

3 Insert the three dome casing screws into the screw holes and tighten them with the wrench supplied to secure the dome casing and the unit casing.

Replacing the Lens

Applicable lens (CS-mount lens)

Contact your Sony dealer for information on applicable lenses.

Attaching a lens

1

2

 

4 3

1 Remove the lens plug.

2 Turn the lens counterclockwise to remove it.

Notes

•At first the lens may make idle turns because of the slip mechanism. When the lens stops, turn it in the same direction (counterclockwise) again and remove it from the camera.

•Be careful not to damage the lens plug or cable when removing the lens.

3 Put a lens on the mounting position and turn the lens clockwise. When the lens stops, turn it again in the same direction (clockwise) to fix the lens in place.

4 Insert the lens plug.

Connections and Installation Basic

Installing the Unit 17 GB