3Insert the cables through the side conduit hole, and connect the cables to their respective connectors, and secure them with the cable clamp.
Network cable: Connect to a network port of this unit.24 V AC/12 V DC (power input) cable: Connect to an AC/DC IN connector.I/O cable: Connect to EXT CTRL connector.
Audio cable: Connect to MIC/SP connector.4Attach the plug that was removed from the side conduit hole to the bottom conduit hole.
Notes
•When you connect a pipe/plug to the conduit hole, be sure to turn the pipe/ plug all the way and lock it in place.
Otherwise, moisture may leak into the casing.
•When you insert the plug in the bottom conduit hole, clean the thread grooves of the bottom conduit hole and install the plug securely.
•Cover the joint part of the pipe/plug with silicon sealant, etc. to prevent moisture from getting inside the casing.
•Use a pipe/plug with a thread length of 12 mm or less so that it does not damage the camera.
Then secure the screw firmly so that it will not come loose.
Ceiling
Wire rope
5 Install the camera on the ceiling or |
| ||
| |||
| |||
| |||
wall with the four supplied screws. |
| ||
| |||
| |||
|
|
| |
|
|
| |
|
|
| |
Notes |
| Basic | |
• Be sure to install the supplied wire rope to | |||
| |||
the camera and the ceiling or wall. | Installation | ||
needed. | |||
• If the ceiling or wall material is not strong |
| ||
enough to hold the screws, the camera may |
| ||
fall off. Reinforce the ceiling or wall as | and | ||
• If you cannot use screws on a ceiling or | |||
| |||
wall, or if you want to hide the camera to | Connections | ||
be less conspicuous, use the | |||
| |||
ceiling bracket (optional) with which you |
| ||
can mount the camera on the ceiling. |
| ||
12 mm or less
4 When installing on a ceiling or wall, fix the supplied wire rope to the bottom of the camera and the ceiling (or wall).
1Fix the wire rope to the ceiling or
wall.
2Remove the screw on the bottom of the camera, and string the screw through the hole of the wire rope.
Installing the Unit 15 GB