To specify the IP address manually:

Select Use the following IP address, and type the IP address, Subnet mask and Default gateway in each box.

8 Set the primary DNS Server address and, if necessary, secondary DNS server address.

To obtain the DNS server addresses automatically:Select Obtain DNS server address automatically.To specify the DNS server addresses manually:

Select Use the following DNS server address, and type the Primary DNS server address and Secondary DNS address in each box.

Note

The Third DNS server address and Fourth DNS server address are invalid for this unit.

9 Set the HTTP port number.

Normally select 80 for the HTTP port No. To use another port number, select the text box and type a port number between 1024 and 65535.

10Type the Administrator name and Administrator password.

The default settings of both items are “admin.”

Note

You cannot change the Administrator name and Administrator password in this step. To change these items, see “Setting the User – User setting Page” of the User’s Guide stored in the supplied CD-ROM.

11Confirm that all items are correctly set, then click OK.

If “Setting OK” is displayed, the IP address is correctly assigned.

12To access the camera directly, double-click the camera name on the list.

GB 22 Assigning the IP Address to this Unit