Input pins

Connectable device

Remarks

 

 

Switch

-

 

 

Volume

With 10 kΩ , B-curve

 

 

Emergency broadcast

Connected via relay

system

 

 

 

Output pins

 

 

 

Connectable device

Remarks

 

 

LED

24 V DC or less, 40 mA or less

 

 

Relay

24 V DC or less, 40 mA or less

 

 

EREMOTE RS-232C connector (D-sub, 9-pin, male) This is an RS-232C serial connector for remote control. When a PC is connected, parameters can be set using the SRP-X500P Manager software. The SRP-X500P can be controlled from the external controller connected to the REMOTE RS-232C connector.

FOUTPUT connector section

These connectors output the video signal input from the AV/RGB INPUT video connectors.

Signal format conversion is not carried out.

COMPONENT/RGB connector (HD D-sub,15-pin, female): Outputs component or RGB signal.

VIDEO connector (phono jack): Outputs composite signal.

GSPEAKERS CH terminals (1 to 4) (screw terminal) These are the output terminals of the internal power amplifiers.

For details on connecting the speakers, see “Speaker connection” on page 19.

HCIRCUIT BREAKER button

The circuit breaker cuts off the main power when excessive current flows through the AC IN connector. If the circuit breaker trips, press the CIRCUIT BREAKER button to reset the breaker, but do not use the SRP-X500P. Instead, turn it off and contact the Sony dealer from whom you purchased the unit.

IAC IN connector

Connects the supplied AC power cord.

JLINE OUTPUT connectors (1 to 4) (phono jack) Connect to the line input connectors of a power amplifier, CD/MD recorder, etc.

The LINE OUTPUT 3/4 connectors are factory-set to function as the REC OUT connectors.

KAV/RGB INPUT audio connectors (A to E) (phono

jack)

Connect to the audio output connectors of the devices whose video output is connected to the NAV/RGB INPUT video connectors on the SRP-X500P.

When connecting a device, be sure that each output connector on the device is connected to the AV/RGB INPUT video and audio connector on the SRP-X500P with the corresponding letter (A to E).

LLINE IN connectors (phono jack)

Connect to the line output connectors of a CD player, MD recorder, etc.

MMIC INPUT connectors (1 to 4) (XLR-3-31 type) Connect wired microphones. When wired microphones are connected to the MIC INPUT 1/2 connectors, the input signal from the wireless microphones take priority from the moment the tuner units begin receiving the signal.

NAV/RGB INPUT video connectors (A to C: phono

jack, D and E: HD D-sub, 15-pin, female) Connect to the video output connectors of the devices whose audio output is connected to the KAV/RGB INPUT audio connectors on the SRP-X500P.

When connecting a device, be sure that each output connector on the device is connected to the AV/RGB INPUT video and audio connector on the SRP-X500P with the corresponding letter (A to E).

Location and Function of Parts

13