Overview
Features
The SRP-X500P is a versatile powered mixer which incorporates an audio mixer, RGB/video switcher, processor, and power amplifier into a 3U-rack-size unit.
9 preset AV system type settings
By setting the SYSTEM TYPE selector, the SRP-X500P supports various AV system comfigurations.
Projector control
The PROJECTOR CONTROL RS-232C connector or the CONTROL S IN/OUT connectors can be used to change the power status of a Sony projector or plasma display to on or to standby, and to select the input signal.
Built-in digital mixer
The digital mixer features A/D and D/A converters with a 24-bit/48-kHz sampling rate and a high-performance DSP. In addition to regular audio mixer features, the SRP- X500P offers such digitally enabled functions as a feedback reducer comprising an independent channel and automatic gain control (AGC).
Various audio input/output connectors
Four microphone inputs and two stereo line inputs can be freely assigned to four output systems.
Compatibility with composite/RGB/ component signals
The SRP-X500P is equipped with three composite inputs and two RGB/component inputs. These inputs eliminate the need for a separate RGB switcher or video switcher, resulting in a simplified system configuration. The SRP- X500P supports high-resolution component signals such as 480p and 1080i, and also SXGA (1280 × 1024 pixels) for RGB.
Built-in digital amplifiers
90 W + 90 W + 50 W + 50 W (8Ω or 4Ω) power amplifiers are incorporated. The SRP-X500P also supports 60 W high-impedance speakers (70 V LINE, 82Ω).
Remote connectors for external devices
•RS-232C connectors
The REMOTE RS-232C connector allows the use of an
external personal computer or system controller to control the SRP-X500P.
•REMOTE PARALLEL connector
Input signal selection, volume control and scene control of the SRP-X500P can be performed via the input pins. Through the output pins, remote control of the environmental equipment such as a screen and lighting equipment, and the status display of the SRP-X500P can be carried out.
Installation of up to two tuner units
To enable the use of wireless microphones, the tuner slots of the SRP-X500P allow the installation of up to two WRU-806 units (not supplied) or the URX-M1 Tuner Units that come with the UWP-X1/X2 (not supplied).
Rack mounting
The SRP-X500P can be mounted into an EIA-standard 19- inch rack (with a 3U-height).
Setting up the SRP-X500P using the supplied program
The CD-ROM that comes with the SRP-X500P contains the SRP-X500P Manager program for setting the parameters including AGC (automatic gain control), routing, and equalizer to allow you fine parameter settings.
The SRP-X500P manuals
The two following manuals are supplied with the SRP- X500P:
•Operating Instructions (provided on the supplied CD- ROM)
•User’s Guide (provided on the supplied CD-ROM)
The Operating Instructions mainly describe SRP-X500P operations. The User’s Guide explains how to set the parameters using the program “SRP-X500P Manager” supplied on the CD-ROM.
Using the supplied CD-ROM
The CD-ROM contains the following files.
SRP-X500P Operating Instructions
This is a PDF file containing information on the functions and operations of the SRP-X500P Digital Powered Mixer.
SRP-X500P Manager User’s Guide
This is a PDF file containing information on the functions and operations of the SRP-X500P Manager.
