Releasing the buttons automatically cancels the group and channel selection mode, and the currently displayed group is selected.
Refer to “Wireless Microphone System Frequency List” supplied with the
3 Press and hold down the CH button, and press the + or
– button in 3 seconds to select a channel.
Similer to step 2, each time you press the + or – button, the CH indication changes in the order shown in the group and reception channel list.
Refer to “Wireless Microphone System Frequency List” supplied with the
If you press the + button when the last channel of the selected group is displayed, the first channel of the group will be displayed.
Display example of
Selecting the reception channel by frequency Press the + button.
This changes the GP/CH indication to a frequency indication.
To change a frequency, press the + or – button while keeping the CH button pressed. (A higher or lower frequency will be displayed.)
Press the + button again to change the frequency indication to a GP/CH indication.
GP CH | GP CH |
Display example of
4 If the desired channel or frequency is displayed, release the CH button and + or – button.
The selected channel is set.
To store the selected group and channel Leave the indication unchanged for 1 second.
The group and channel set in the procedure explained above are stored in memory.
16 Installation