Note

When removing the blank panels to the SRP-X500P, be sure to start with the small panel.

Rack mounting

About the rack

Use an EIA-standard 19-inch rack with a depth of 450 mm or more.

Use four screws of the same diameter as the rack screw holes and with an effective length of 12 mm or more to mount the SRP-X500P into the rack.

Rack

Screws (+B M5 X 12)

SRP-X500PScrews (+B M5 X 12)

Note

When mounting the SRP-X500P into a rack, be sure it is done by 2 people or more.

WRU-806 channel setting

Take the following precautions to prevent interference and noise.

•If there is a TV broadcasting station nearby, to avoid possible interference from its broadcasting, do not use that station’s channel.

•When simultaneously using two or more tuners, always set the tuners to different channels within the same group (other than group 00).

GP button

+ button

RF indicator

CH button

– button

1 Turn on the SRP-X500P.

2 Press and hold down the GP button, and press the + or

– button to select a group.

Each time you press the + or – button, the GP indication changes as shown in the following figure. To change the indication continuously, press and hold down the + or – button.

 

GP CH

GP CH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display example of WRU-806B (CE62 model)

GP CH

 

 

 

 

GP CH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display example of WRU-806B (U66 model)

GP CH

GP CH

Display example of WRU-806A (AU66 model)

The CH indication shows the lowest frequency channel of the selected group. For group 00, however, the channel selected last is displayed.

Installation 15