• Delay

SYSTEM TYPE 6: Select when no compensation is necessary.

SYSTEM TYPE 7: Select when the distance between the front speakers and the satellite speakers are 5 meters to 8 meters (16.7 feet to 26.7 feet).

SYSTEM TYPE 8: Select when the distance between the front speakers and the satellite speakers are 8 meters to 11 meters (26.7 feet to 36.7 feet).

SYSTEM TYPE 9: Select when the distance between the front speakers and the satellite speakers are 11 meters to 14 meters (36.7 feet to 46.7 feet).

 

 

SPEAKERS

 

 

 

 

 

 

 

 

 

 

SP 1

SP 2

SP 3

SP 4

 

 

 

 

 

 

SYSTEM TYPE 6

ON/OFF

OFF

OFF

OFF

OFF

 

 

 

 

 

 

 

TIME

0ms

0ms

0ms

0ms

 

 

 

 

 

 

SYSTEM TYPE 7

ON/OFF

OFF

OFF

ON

ON

 

 

 

 

 

 

 

TIME

0ms

0ms

34.6ms

34.6ms

 

 

 

 

 

 

SYSTEM TYPE 8

ON/OFF

OFF

OFF

ON

ON

 

 

 

 

 

 

 

TIME

0ms

0ms

43.3ms

43.3ms

 

 

 

 

 

 

SYSTEM TYPE 9

ON/OFF

OFF

OFF

ON

ON

 

 

 

 

 

 

 

TIME

0ms

0ms

52.0ms

52.0ms

 

 

 

 

 

 

Details on the contents of SYSTEM TYPE preset pattern settings

•MIC INPUT Low Cut Filter (common to all SYSTEM TYPE preset patterns)

Default setting: ON

Cutoff frequency: 100 Hz, –12 dB/oct

•INPUT MUTING (common to all SYSTEM TYPE preset patterns)

Default setting: OFF

•OUTPUT LINK

In the AV system incorporating stereo speakers, the level of the L channel and the R channel links and the ouput level of the L and R channels is equal to each other.

•COMPRESSOR (common to all SYSTEM TYPE preset patterns)

FUNCTION ON / OFF

ON

 

 

THRESHOLD

10dB

 

 

RATIO

∞ : 1

 

 

ATTACK

0.47ms

 

 

RELEASE

100ms

 

 

•REMOTE FADER

Depends on the SYSTEM TYPE preset patterns.

For details, refer to SRP-X500P Manager User’s Guide.

To change the preset settings, set the SYSTEM TYPE selector to “0,” and make each setting on the SRP-X500P Manager program.

To suppress howling

By using the FEED BACK REDUCER buttons, you can suppress howling by detecting the frequency bands in which the howling may occur, and then reducing the gain of those bands through the 5-band equalizer.

To detect the frequency bands in which howling may occur in order to suppress howling

Make settings on the microphone and the SRP-X500P to suppress howling more effectively.

1 Set the reference level for the microphone.

While talking on the microphone in a normal voice, adjust the TRIM control so that the REF. indicator lights intermittently.

Note

When you use a wireless microphone, adjust the attenuator on the microphone instead of the TRIM control.

2 Adjust the volume on the SRP-X500P.

Set the input level control and the MASTER control to 0 dB position.

3 Set up the microphone.

Place the microphone where it is used and adjust the direction.

4 Adjust the speaker output.

Turn up the SPEAKER OUT control on the SRP- X500P slowly until the speaker output reaches the level to be heard from anywhere within the place. Be sure to turn down the SPEAKER OUT control whose corresponding speaker output is not used fully to –∞dB.

5 Perform the howling suppression.

Keep pressing the FEED BACK REDUCER button on the SRP-X500P for the corresponding MIC INPUT connector for 2 seconds or more.

The button indicator flashes as the SRP-X500P scans the frequency bands.

When the button indicator stops flashing and lights up, howling suppression is completed.

Notes

•While the SRP-X500P is scanning the frequency bands, the sound similar to howling may be output. If the output sound is too loud, press the FEED

22 System Configurations and Speaker Connections