Precautions
•The SRP-X500P must be used within a temperature range of 0°C to 40°C (32°F to 104°F).
•Operating the SRP-X500P near electrical equipment (motors, transformers, or dimmers) may cause it to be affected by electromagnetic induction. Keep the SRP- X500P as far from such equipment as possible.
•The presence of the lighting equipment may produce electrical interference over a very wide frequency range. Position the antennas and the wireless microphones to be used with the SRP-X500P so that interference is minimized.
•To avoid degradation of the signal-to-noise ratio, do not use the SRP-X500P near sources of electrical noise or in locations subject to vibration, such as the following:
−near electrical equipment, such as motors, transformers or dimmers
−near air conditioning equipment or places subject to direct air flow from an air conditioner
•Clean the surface and the connectors of the SRP-X500P with a dry, soft cloth. Never use thinner, benzene, alcohol or any other chemicals, since these may mar the finish.