Receiving
Broadcasts
This chapter describes how to receive FM or AM broadcasts and how to preset selected stations.
You can tune in stations on this receiver in the following ways:
Direct Tuning
You can enter a frequency of the station you want directly by using the numeric buttons on the remote (see page 39).
Automatic Tuning
If you don’t know the frequency of the station you want, you can let the receiver scan all available stations in your area (see page 39).
Preset Tuning
After you have tuned in stations using Direct Tuning or Automatic Tuning, you can preset them to the receiver (see page 40). Then you can tune in any of the stations directly by entering its
Before you begin, make sure you have:
•Connected an FM and AM antenna to the receiver (see page 5).
•Selected the appropriate speaker system (see page 23).
Broadcasts Receiving