Recording on a video tape
You can record from a TV, or an LD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See your LD player’s instruction manual if you need help.
1Select the program source to be recorded.
2Prepare the component for playing.
For example, insert the laser disc you want to record into the LD player.
3Insert a blank video tape into the VCR for recording.
4Start recording on the recording VCR, then start playing the laser disc you want to record.
zYou can record the sound from any audio source onto a video tape while recording from a laser disc
Locate the point where you want to start recording from another audio source, select the program source, then start playback. The audio from that source will be recorded onto the audio track of the video tape instead of the audio from the original medium.
To resume audio recording from the original medium, select the video source again.
Note
Please be sure to make both digital and analog connections to the DVD/LD inputs. Analog recording is not possible if you only make digital connections.
Using the Sleep Timer
You can set the receiver to turn off automatically at a specified time.
Press SLEEP on the remote while the power is on.
Each time you press SLEEP, the time changes as shown below.
n2:00:00 n1:30:00n1:00:00 n0:30:00 nOFF
The display dims after you have specified the time.
zYou can freely specify the time
First, press SLEEP on the remote, then specify the time you want using the jog dial on the receiver. The sleep time changes in 1 minute intervals. You can specify up to 5 hours.
zYou can check the time remaining before the receiver turns
off
Press SLEEP on the remote. The remaining time appears in the display.
Operations Other