Information Additional
Specifications
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Sensitivity Mono: 18.3 dBf, 2.2 µV/
75 ohms
Stereo: 38.3 dBf, 22.5
µV/75 ohms
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N | Mono: 76 dB |
| Stereo: 70 dB |
Harmonic distortion at 1 kHz | |
| Mono: 0.3% |
| Stereo: 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response
30 Hz - 15 kHz
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range Australia, Singapore and Malaysia models:
531 - 1602 kHz (9 kHz step)
| Canada model: | |
| 530 | - 1710 kHz (10 kHz |
| step)c) | |
| 531 | - 1710 kHz (9 kHz |
| step)c) | |
| Other countries models: | |
| 530 | - 1610 kHz (10 kHz |
| step)c) | |
| 531 | - 1602 kHz (9 kHz |
| step)c) | |
Antenna | Loop antenna |
Usable sensitivity
50 dB/m (at 999 kHz)
S/N | 54 dB (at 50 mV/m) |
Harmonic distortion
0.5% (50 mV/m, 400 kHz)
Selectivity At 9 kHz: 35 dB
c)You can change the AM tuning interval to 9 kHz. After tuning in any AM station, turn off the receiver. Hold down the TUNING + button and press the ?/1button. All preset stations will be erased when you change the tuning interval. To reset the scale to 10 kHz, repeat the procedure.
Video section
Inputs | Video: 1 |
| |
| Y: 1 |
| C: 0.286 |
Outputs Video: 1
Y:1
C:0.286
*
General
System Tuner section:
PLL
Preamplifier section:
Power amplifier section:
SEPP
Power requirements
Canada model: 120 V
AC, 60 Hz
Australia model: 240 V
AC, 50 Hz
Singapore and Malaysia
models: 220 - 230 V
AC, 50/60 Hz
Power consumption
Canada model:
Australia, Singapore and Malaysia models:
Other countries:
AC outlets
1 switched, max 100 W
Dimensions 430 ⋅ 303 ⋅ 157 mm including projecting parts and controls
Mass (Approx.)
Canada model:
Australia model:
Singapore and Malaysia models:
Other countries:
8.0 kg
Supplied accessories
See page 4.
The specification measured is under
•230 AC 50 Hz condition (Singapore and Malaysia models)
•240 AC 50 Hz condition (Australia model).
Design and specifications are subject to change without notice.