1Hold down the Function button whose function you want to change (for example, MD/TAPE).
2Press the corresponding button of the component you want to assign to the Function button (for example, 1 - CD player).
The following buttons are assigned to select the functions:
To operate | Press |
|
|
CD player | 1 |
|
|
DAT deck | 2 |
|
|
MD deck | 3 |
|
|
Tape deck A | 4 |
|
|
Tape deck B | 5 |
|
|
LD player | 6 |
|
|
VCR (remote control mode VTR 1*) | 7 |
|
|
VCR (remote control mode VTR 2*) | 8 |
|
|
VCR (remote control mode VTR 3*) | 9 |
|
|
TV | 0 |
|
|
DSS (Digital Satellite Receiver) | >10 |
|
|
DVD | ENTER |
|
|
VCD player | . |
|
|
*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.
Now you can use the MD/TAPE button to control a second CD player.
To change the AUX function to another function
Hold down SLEEP and press the corresponding button of the component you want to assign it to.
To change the 5.1 CH function to another function
Hold down AV ?/1and press the corresponding button of the component you want to assign it to.
To reset a button to its factory setting
Repeat the above procedure.
To reset all the function buttons to their factory setting
Press ?/1, AV ?/1and MASTER VOL – at the same time.
Information Additional