Sony STRDG910 10

Name	Function
A AV ?/1	Press to turn on or off the
(on/standby)	audio/video components that
	the remote is programmed to
	operate.
	To turn the TV on or off, press
	TV (wj) and then press AV
	?/1.
	If you press ?/1 (B) at the
	same time, it will turn off the
	receiver and other components
	(SYSTEM STANDBY).
	Note
	The function of the AV ?/1
	switch changes automatically
	each time you press the input
	buttons (C).

B ?/1	Press to turn the receiver on or
(on/standby)	off.
	To turn off all components,
	press ?/1 and AV ?/1 (A) at
	the same time (SYSTEM
	STANDBY).

CInput buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components as follows. You can program the remote to control non-Sony components following the steps in “Programming the remote” on page 78.

	Button	Assigned Sony
		component

	VIDEO 1	VCR (VTR mode 3)

	VIDEO 2	VCR (VTR mode 2)

	VIDEO 3	VCR (VTR mode 1)

	DVD	DVD player

	SAT	Satellite tuner

	TV	TV

	SA-CD/CD	Super Audio CD/
		CD player

	TUNER	Built-in tuner

	AUX	Not assigned

	DMPORT	DIGITAL MEDIA
		PORT adapter

Name Function

DRECEIVER Press to activate the receiver operation (page 44).

ED.TUNING Press to enter direct tuning mode.

FAUTO CAL Press to activate the Auto Calibration function.

G Numeric		Press to
	buttons	– preset/tune to preset
	(number 5a))	stations.
		– select track numbers of the
		CD player, VCD player, LD
		player, DVD player, MD
		deck, DAT deck, or tape
		deck. Press 0/10 to select
		track number 10.
		– select channel numbers of
		the VCR, satellite tuner,
		Blu-ray disc recorder, PSX,
		DVD/VHS COMBO, or
		DVD/HDD COMBO.
		Press TV (wj) and then press
		the numeric buttons to select
		the TV channels.

H ENTER		Press to enter the value after
		selecting a channel, disc or
		track using the numeric
		buttons of the VCR, CD
		player, VCD player, LD
		player, MD deck, DAT deck,
		tape deck, satellite tuner, Blu-
		ray disc recorder, or PSX.
		To enter the value of Sony
		TV, press TV (wj) and then
		press ENTER.

	MEMORY	Press to store a station during
		tuner operation.

IDISPLAY Press to select information displayed on the TV screen of the VCR, VCD player, LD player, DVD player, CD player, MD deck, Blu-ray disc recorder, PSX, satellite tuner, DVD/VHS COMBO, or

DVD/HDD COMBO.

To select information of Sony TV, press TV (wj) and then press DISPLAY.

10GB

Contents

Page About This Manual Table of Contents Description and location of parts Page About the indicators on the display Page Rear panel Remote commander RM-AAP017 Page Page Page Page 1: Installing speakers 2: Connecting speakers 3a: Connecting the audio components Page Connecting components with analog audio jacks 3b: Connecting the video components Connecting components with HDMI jacks HDMI features If you connect a Blu-raydisc player Notes on HDMI connections Connecting a TV Page Connecting a DVD player/DVD recorder Connecting a DVD player Connecting a DVD recorder Connecting a satellite tuner/ set-topbox Page Function for conversion of video signals In the video input/output conversion table of the receiver Notes on converting video signals 4: Connecting the antennas 5:Preparing the receiver and the remote Performing initial setup operations Inserting batteries into the remote 6:Selecting the speaker system 7:Calibrating the appropriate settings automatically Before you perform Auto Calibration On setting up the active sub woofer Performing Auto Calibration To cancel Auto Calibration When error codes appear When you select “WARN CHK” When you select “PHASE” A. CAL menu parameters 8:Adjusting the speaker levels and balance Selecting a component To mute the sound To avoid damaging your speakers Listening/Watching a component Watching a DVD Navigating through menus Overview of the menus Page Page Page Adjusting the level Adjusting the equalizer Settings for the surround sound Using the surround back decoding mode Types of the surround back decoding functions Settings for the tuner Settings for the audio Settings for the video Settings for the system Page Page Page Enjoying Dolby Digital and DTS surround sound Types of A.F.D. mode If you connect a sub woofer Selecting a preprogrammed sound field Types of sound field available About DCS (Digital Cinema Sound) About CINEMA STUDIO EX modes To turn off the surround effect for movie/music Using only the front speakers Listening to the sound without any adjustment Listening to FM/AM radio Using the controls on the receiver In case of poor FM stereo reception Direct tuning If you cannot tune in a station Presetting radio stations Tuning to preset stations Naming preset stations To create an index name Using the Radio Data System (RDS) Receiving RDS broadcasts Displaying RDS information Description of program types Switching between digital and analog audio Listening to digital sound from other inputs Assignable inputs for digital audio input Enjoying the DIGITAL MEDIA PORT (DMPORT) Connecting the DIGITAL MEDIA PORT adapter To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Listening to a connected component through DMPORT connection Watching a connected component through DMPORT connection Naming inputs Changing the display Using the Sleep Timer Recording using the receiver Programming the remote If programming is unsuccessful, check the following: To clear the memory of the remote To program the remote to control a TV To cancel programming To activate the input after programming To control a CD player To control a DAT deck To control an MD deck To control a tape deck To control an LD player To control a DVD player To control a DVD recorder To control a TV To control a satellite tuner To control a cable box Glossary Page Precautions Troubleshooting Page Video Tuner Remote commander Error messages Specifications Page Page Index