Clearing the receiver’s memory may remedy the problem (page 32). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver.
If the problem persistConsult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained.
Reference sections for clearing the receiver’s memoryTo clear | See |
All memorized settings | |
|
|
Customized sound fields | |
|
|
Specifications
Amplifier section
Models of area code CEL, CEK
Minimum RMS Output Power
(8 ohms, 20 Hz - 20 kHz, THD 0.09%) 90 W + 90 W1)
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W1)
Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%)
140 W per channel1)
Models of area code E2, TW
Minimum RMS Output Power
(8 ohms, 20 Hz - 20 kHz, THD 0.09%) 85 W + 85 W1)
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W1)
Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%)
130 W per channel1)
Models of area code KR
Minimum RMS Output Power
(8 ohms, 20 Hz - 20 kHz, THD 0.09%) 90 W + 90 W1), 80 W + 80 W3)
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W1),
90 W + 90 W3)
Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%)
140 W per channel1),
120 W per channel3)
1)Measured under the following conditions:
Area code | Power requirements |
CEL, CEK, KR | 230 V AC, 50 Hz |
|
|
E2 | 240 V AC, 50 Hz |
|
|
TW | 110 V AC, 60 Hz |
|
|
90GB