Sony STRDG910 Switching between digital and analog audio, (INPUT MODE), Other Operations, Audio input modes

Other Operations

Switching between digital and analog audio

(INPUT MODE)

You can select the audio input mode setting when you connect components to both digital and analog audio input jacks on the receiver.

1 Turn INPUT SELECTOR on the receiver to select the input.

You can also use the input buttons on the remote.

2 Press INPUT MODE repeatedly on the receiver to select the audio input mode.

The selected audio input mode appears on the display.

Audio input modes

xAUTO IN

Gives priority to digital audio signals when there are both digital and analog connections. If there are no digital audio signals, analog audio signals are selected.

Notes

•Some audio input modes may not be set up depending on the input.

•When the ANALOG DIRECT function is selected, audio input is set to “ANALOG” automatically and you cannot select other modes.

Operations Other

xHDMI IN

Specifies the audio signals input to the HDMI jack.

xCOAX IN

Specifies the digital audio signals input to the

DIGITAL COAXIAL jack.

xOPT IN

Specifies the digital audio signals input to the

DIGITAL OPTICAL jack.

xANALOG

Specifies the analog audio signals input to the

AUDIO IN (L/R) jacks.

71GB