Settings for the video

(VIDEO menu)

You can use the VIDEO menu to make various adjustments for HDMI settings, assign the composite video input to DMPORT input, etc. Select “6-VIDEO” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 44) and “Overview of the menus” (page 45).

VIDEO menu parameters

xOSD (On-Screen Display on/off)

Lets you view the amplifier menus on the TV screen and you can adjust the settings easily.

• OSD ON

The on-screen display is turned on so that the amplifier menus are displayed on the TV screen.

• OSD OFF

The on-screen display is turned off.

Note

The on-screen display is not output from the COMPONENT VIDEO MONITOR OUT jack of the receiver. Be sure to connect the HDMI OUT or MONITOR VIDEO OUT jack to your TV.

xDMPORT V. (DIGITAL MEDIA PORT video assign)

Lets you assign the composite video input to DMPORT input so that you can view the images on the TV screen. For details, see “Watching a connected component through DMPORT connection” (page 75).

xAUDIO (HDMI AUDIO)a)

Lets you set the HDMI audio output from the playback component connected to the receiver via a HDMI connection.

•AMP

The HDMI audio signals from the playback component is only output to the speakers connected to the receiver. Multi channel sound can be played back as it is.

Note

Sound is not output from the TV’s speakers.

•TV+AMP

The sound is output from TV’s speaker and the speakers connected to the receiver.

Notes

•The sound quality of the playback component depends on the TV’s sound quality, such as the number of channels, and the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play back multi channel software.

•When you connect the receiver to an image display component (projector, etc.), sound may not be output from the receiver. In this case, select “AMP”.

xCONTROL (HDMI CONTROL)a)

Lets you turn the HDMI CONTROL function on or off. For details, refer to the “HDMI CONTROL Guide” supplied with the receiver.

xCOL SYS (Color TV type selection)b)

•COL NTSC

•COL PAL

xNAME IN (Naming inputs)

Lets you set the name of inputs. For details, see “Naming inputs” (page 76).

a)When you select this parameter, the “HDMI” flashes on the display.

b)Models of area code CEL, CEK, E2 only.

54GB