Naming inputs

You can enter a name of up to 8 characters for inputs and display it on the receiver’s display. This is convenient for labeling the jacks with the names of the connected components.

1 Press one of the input buttons to select the input you want to create an index name for.

You can also use INPUT SELECTOR on the receiver.

2 Press RECEIVER.

The RECEIVER indicator lights up and receiver operation is activated.

3 Press MENU.

“1-LEVEL” appears on the display.

4 Press V/v repeatedly to select either “5-AUDIO” or “6-VIDEO”.

5 Press or b to enter the menu.

6 Press V/v to select “NAME IN”.

7 Press or b to enter the parameter.

The cursor flashes and you can select a character. Follow the procedure given in “To create an index name” (page 69).

Changing the display

You can check the sound field, etc., by changing the information on the display.

Be sure to use the buttons on the receiver for this operation.

Press DISPLAY repeatedly.

Each time you press the button, the display changes cyclically as follows:

All inputs except the FM and AM band

Index name of the inputa) t Selected input

tSound field currently applied

FM and AM band

Program Service nameb) or preset station namea) t Frequency t Program Type indicationb) t Radio Text indicationb) t Current Time indication (in 24-hour system mode)b) t Sound field currently applied

a)Index name appears only when you have assigned one to the input or preset station (page 68, 76). Index name does not appear when only blank spaces have been entered, or it is the same as the input name.

b)During RDS reception only (Models of area code CEL, CEK only) (page 69).

Note

Character or marks may not be displayed for some languages.

76GB