1 Press TUNER repeatedly to select the FM or AM band.

2 Press TUNING + or TUNING –.

Press TUNING + to scan from low to high; press TUNING – to scan from high to low.

The receiver stops scanning whenever a station is received.

Using the controls on the receiver

1Turn INPUT SELECTOR to select the FM or AM band.

2Press TUNING MODE repeatedly to select “AUTO T.”.

3Turn TUNING +/–.

In case of poor FM stereo reception

If the FM stereo reception is poor and “ST” flashes on the display, select monaural audio so that the sound will be less distorted.

•To select monaural audio, you can

–press FM MODE repeatedly until the “MONO” indicator lights up on the display.

–set “FM MODE” in TUNER menu to “FM MONO” (page 52).

•To return to stereo mode, you can

–press FM MODE repeatedly until the “MONO” indicator on the display do not light up.

–set “FM MODE” in TUNER menu to “FM AUTO” (page 52).

Direct tuning

You can enter the frequency of a station directly by using the numeric buttons.

 

SAT

TV

SA-CD/CD TUNER

1

 

AUX

DMPORT

RECEIVER

 

 

2CH

A.F.D.

MOVIE

MUSIC

 

 

SLEEP

FM MODE D.TUNING AUTO CAL

2

 

1

 

2

3

3

 

 

4

 

5

6

 

 

7

 

8

9

 

 

-/--

 

 

 

4

 

CLEAR 0/10

ENTER

 

>10

 

MEMORY

1 Press TUNER repeatedly to select the FM or AM band.

You can also use INPUT SELECTOR on the receiver.

2 Press D.TUNING.

3 Press the numeric buttons to enter the frequency.

Example 1: FM 102.50 MHz

Select 1 b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz

Select 1 b 3 b 5 b 0

4 Press ENTER.

You can also use MEMORY/ENTER on the receiver.

Tip

If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.

If you cannot tune in a station

Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area.

66GB