Display |
| Explanation |
xxx* IN | The speaker is in phase. | |
|
| |
xxx* OUT | The speaker is out of phase. The | |
|
| “+” and |
|
| speaker may be connected the |
|
| other way around. However, |
|
| depending on the speakers, |
|
| “xxx OUT” appears on the |
|
| display even though the speakers |
|
| are connected properly. This is |
|
| because of the speakers’ |
|
| specifications. In this case, you |
|
| can continue to use the receiver. |
| ||
* xxx represent a speaker channel. | ||
FL | Front Left | |
FR | Front Right | |
C | Center |
|
SL | Surround Left | |
SR | Surround Right | |
SBL | Surround Back Left | |
SBR | Surround Back Right | |
SW | Sub woofer |
Tip
Depending on the position of the sub woofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value.
A. CAL menu parametersSelect
xAUTO CAL (Auto Calibration on/ off)
•A.CAL NO
The Auto Calibration function is turned off.
•A.CAL YES
The Auto Calibration function is turned on. To start Auto Calibration, press .
xCAL TYPE (Calibration type)*
• ENGINEER
Sets the frequency characteristics to a set that matches that of the Sony listening room standard.
• FLAT
Makes the measurement of frequency from each speaker flat.
• FRT REF
Adjusts the characteristics of all speakers to match the characteristics of the front speaker.
xCAL LOAD (Preset measurement loading)*
•LOAD NO
Select this when you do not want to load the saved Auto Calibration result.
•LOAD YES
Select this when you want to load the saved Auto Calibration result.
*You can select this parameter only when you have performed the Auto Calibration and saved the settings.
38GB