Sony VGX-XL1 manual Changer and select Manage Discs, Manage Discs or to My DVDs

Loading Media Changer	Unloading Media Changer
1 Make sure the Changer/Recorder is	To eject discs using Media Center:
properly connected to the Personal	1 From Media Center, go to My
Computer and is turned on.
Note: When loading discs, make	Changer and select Manage Discs.
	2 Select the Eject button associated
sure that the label is facing to the
right of the slot.	with the disc you want to eject.
2 To load a single disc, press the	To eject discs manually:
Load button once and insert the disc	1 Press the Eject button one time to
in the slot. To load multiple discs,
	eject the last inserted disc.
press the Load button twice and
insert each disc in the slot one at a	or
time. The drive will be blocked until	2 Press the Eject button two times to
the system is ready for the next disc.
	eject all discs in the changer slots.
3 Once the discs have been inserted,
	This will not eject the engaged disc
they must be scanned by Media
	in the changer drive. You must go to
Center before they can be viewed.
	Media Center to eject the last disc.
Go to More Programs and select
	See steps 1 through 2 of To eject
Manage Discs or to My DVDs
	discs using Media Center.
4 Click Yes on the NEW DISCS
FOUND message to update your
library with the new disc(s)
information.

Loading Media Note: It will take about 30 seconds for Media Center to scan each disc. It is recommended to insert each disc into the changer, and then let them all scan one after the other. For additional information, go to the Manage Discs topic in My Changer.

66