Cabletron Systems 9A000 SCP Diagnostics, B.1.2.7 Serial Port Test, B.1.2.8 SRAM Test, Serial OK

SCP Diagnostics

B.1.2.7 Serial Port Test

This test checks the serial port’s functionality. It takes about two seconds to run.

=>test-serial

Serial: OK

B.1.2.8 SRAM Test

This test checks the SRAM’s functionality. It takes about two seconds to run.

NOTE: It is recommended that you back up your CDB before running this test. The SRAM is saved before testing and then restored. However, if a power failure would occur or if the switch were rebooted during the test, some of the data may not be restored properly.

=>test-sram

SRAM: OK

B.1.2.9 Timer Test

This test checks to see if the timer is counting correctly. It takes about two sec- onds to run.

=>test-timer

Timer: OK

B.1.2.10 Hardware Test

This series of tests checks the functionality of all of the hardware devices in the SCP, except the FLASH chips and SRAM. It takes about fifteen seconds to run.

=>test-all

Clock: OK

DRAM: OK

Ethernet: OK

Timer: OK

}Serial: OK

B-7