Cabletron Systems 9A000 manual SCP Diagnostics

			SCP Diagnostics
do [offset]	- download using	Xmodem
ps [address]	- single step through program, skipping procedure
	calls
st [address]	- single step through		program
go [address]	- go from start,	or continue from breakpoint
fr address#times - display one or		more	real (32 bit) floating
point numbers
fl address#times - display one or		more	long real (64 bit)
floating point numbers
fx address#times - display one or		more	extended real (80 bit)
floating point numbers
da address#times - disassemble one or more instructions
db address#bytes - display one or		more	bytes
ds address#shrts - display one or		more	shorts
di address#words - display one or		more	words

ddaddress#times - display one or more sets of double words dt address#times - display one or more sets of triple words dq address#times - display one or more sets of quad words

re	-	dump contents of registers
di reg	-	display the contents of the register 'reg'
mo reg	-	modify a register. Reg can NOT be fp0-fp3,
mo address#words -		modify one or more words in memory
mb address	- modify a byte in memory (doesn't read byte first)
fi address address		data - fill memory with data value

tr option on/off - turn on or off one of the following trace options

branch, call, return or supervisor call

br [address]	- set	instruction break. If no address is given,
all current breakpoints are displayed
bd [address]	- set data breakpoint. If no address is given,
all current breakpoints are displayed
de address	- delete specified instruction or data breakpoint
- repeat previous command
test-clock		- test Real Time Clock
test-dram		- test DRAM
test-dc <bank> <chip>		- test DRAM chip # <chip> in bank <bank>
test-ethernet		- test Ethernet
test-flash		- test Flash
test-fc <chip>		- test Flash chip <chip>
test-serial		- test Serial Port
test-sram		- test SRAM
test-timer		- test Timer
test-all		- test all devices, except Flash and SRAM
test-manufact		- test all devices

B-3