Cabletron Systems 9A000 manual PCA-200MAC Technical Specifications

Hardware Specifications

C.3.4 PCA-200MAC Technical Specifications

The PCA-200MAC ATM Adapter provides ATM connectivity to PCI-based Apple Power Macintoshes, and has the following specifications:

	Hardware
Architecture	On-board 25 Mhz i960 RISC processor
AAL Support	Special-purpose hardware for AAL5 and AAL3/4, HEC, and CRC
	calculations
UNI	100 Mbps TAXI (4B/5B encoding);
	155Mbps OC-3/SONET STS-3c/SDH STM-1
Form Factor	Single-slot PCI bus, half-card
Compliance	ATM cell processing per ANSI T1S1.5/92-002R3, ITU I.361, and
	ATM Forum UNI v3.0 specification
Cabling	Duplex 62.5/125 ∝m multimode fiber (2 km max. run, 10 dB loss);
	2-pair 100 ohm CAT 5, or CAT 5 screened, UTP (100 meters max.)
Connectors	ST and SC Types for multimode fiber; RJ-45 for CAT 5 UTP copper
	Software

Supports up to 1024 Virtual Circuit Identifiers (VCIs)

Support for UNI 3.0 signalling

Support for LAN Emulation Clients

	General
Dimensions	H: 0.5" x W: 3.3" x D: 5.8" (1.3 cm x 8.4 cm x 14.7 cm)
Weight	6 oz (170 g)
Power Requirements	2 amps (maximum) @ +5V
Operating Temperature	32˚F to 104˚F (0˚C to 40˚C)
Operating Humidity	20% to 80% non-condensing @ 40˚C
Compliance	FCC Part 15, Class A Verification and UL 1950

C-23