Cabletron Systems 9A000 manual Software Description, Standards Compliance, Safety Compliance

Introduction

1.2.7Standards Compliance

•ITU I.361 ATM Layer

•ATM Forum UNI 3.0

1.2.8Safety Compliance

•US: UL 1950

•Canada: CSA 22.2 No. 950-M89

•Europe: EN 60950

1.2.9Emissions Compliance

•FCC Part 15, Class A

•CISPR 22, Class A

•VCCI, Class 1

1.2.10Electromagnetic Compatibility (EMC)

The following all comprise EN 50082-1:

•ESD Susceptibility: IEC 801-2, Level 3

•Radiated Susceptibility: IEC 801-3, Level 2

•Electrical Fast Transient Compatibility: IEC 801-4, Level 2

1.3Software Description

The software for the 9A000 and SFCS series runs on a FLASH file system to accomplish switch and connection management, IP connectivity, and SNMP network management.

1.3.1 Switch Control Software

The Switch Control Software (SCS) is the “brains” of the 9A000 and

SFCS series switches. The SCS controls the 9A000 and SFCS series switch board and handles connection set-up and tear-down duties. The SCS can also communicate with other Cabletron Systems switches using the SPANS NNI protocol to learn network topology and establish connections across multiple switches. In addition, there is an SNMP agent built into the SCS to allow SNMP management and control.

1-7