Cabletron Systems 9A000 manual Dram Chip Test, Ethernet Test, Flash Test

SCP Diagnostics

B.1.2.3 DRAM Chip Test

This test checks the functionality of a DRAM chip. It takes about two seconds to run.

=>test-dc a

DRAM chip: OK

B.1.2.4 Ethernet Test

This test checks the functionality of the Ethernet chip. It takes about two sec- onds to run.

=>test-ethernet

Ethernet: OK

B.1.2.5 FLASH Test

This test checks the functionality of each FLASH chip. It takes about five min- utes to run.

NOTE: It is recommended that you back up your CDB before running this test. The chips are saved before testing each one and then restored. However, if a power failure would occur or if the switch were rebooted during the test, some of the data may not be restored properly.

=>test-flashFlash Test Save Chip 0

Erase Chip

Pattern 0

Erase Chip

Pattern 1

Erase Chip

Pattern 2

Erase Chip

Pattern 3

.

B-5