Sony VPL-HS2 13 GB, adjuster, wall outlet, using the ZOOM ring and the, the picture to fit the screen, 1 Plug the AC power cord into a, and Connections Preparations

1 Plug the AC power cord into a	6 Adjust the size and position of
wall outlet.	the picture to fit the screen
The ON/STANDBY indicator lights in red and	using the ZOOM ring and the
the projector goes into standby mode.	adjuster.
	Turn the ZOOM ring to adjust the picture size.

ON/	Lights in red.
STANDBY

and Connections Preparations

2 Press the [/1 (on/standby) switch to turn on the projector.

The ON/STANDBY indicator lights in green.

ON/	Lights in green.
STANDBY

3 Turn on the equipment connected to the projector.

Refer to the operating instructions of the connected equipment.

4 Press INPUT to project the picture on the screen.

Each time you press the button, the input indication changes. (1 page 19)

Video 1

NTSC 3.58

INPUT

5 Adjust the focus roughly using the FOCUS ring.

ZOOM ring

Adjusting the picture position using the adjuster

Hold down and slide the adjuster lock lever to the right, move the projector, then return the lock lever.

Adjuster lock lever

You can move the projector horizontally or vertically within the following ranges:

Up to 30º each way horizontally

Up to 10º each way vertically

FOCUS ring

Step 3: Adjusting the Picture Size and Position 13 GB