Sony VPL-HS2 Input, System, 5Replace the filter cover

4Insert the new air filter into the filter holder with the white surface up, put the holder face down, then replace it into the projector.

5Replace the filter cover.

6While pushing the projector cover toward you by holding both sides of the cover on the lens side, close the cover until it clicks.

Specifications

System

Projection system
	3 LCD panels, 1 lens, projection
	system
LCD panel	0.62-inch TFT LCD panel, 1,245,816
	pixels (415,272 pixels × 3)
Lens	1.2 times zoom lens (manual)
	f33.6–42mm/F1.85–2.2
Lamp	150 W UHP type
Projection picture size
	Range: 40 to 150 inches (measured
	diagonally)
Color system	NTSC3.58/PAL/SECAM/NTSC4.43/
	PAL-M/PAL-N system, switched
	automatically/manually
Acceptable video signals
	15 kHz RGB/component 50/60 Hz,
	Progressive component 50/60 Hz,
	DTV (480/60i, 575/50i, 480/60p,
	575/50p, 720/60p, 720/50p, 1080/
	60i, 1080/50i), 1080/24PsF,
	Composite video, Y/C video
Acceptable computer signals
	fH: 19 to 72 kHz
	fV: 48 to 92 Hz
	Maximum resolution XGA 1024 ⋅
	768, fV: 85 Hz
Speaker	Monaural speaker system, 33 mm
	(1 5/16 inches) diameter,
	max. 2 W ⋅ 1

Input

Video input	VIDEO: phono type
	Composite video: 1 Vp-p±2 dB
	sync negative (75 ohms terminated)
	S VIDEO: Y/C, mini DIN 4-pin type
	(male)
	Y (luminance): 1 Vp-p±2 dB sync
	negative (75 ohms terminated)
	C (chrominance): burst 0.286 Vp-p
	±2 dB (NTSC)
	(75 ohms terminated)
	burst 0.3 Vp-p±2 dB (PAL)
	(75 ohms terminated)
PJ MULTI	32-pin multi connector
	Composite video: 1 Vp-p±2 dB sync
	negative (75 ohms terminated)
	S video: Y/C
	Y (luminance): 1 Vp-p±2 dB sync
	negative (75 ohms terminated)

Others

Specifications 33 GB